Scottsdale, Arizona

 

VPN 803 mounting bracket holds the factory cold air tube in place on the lower hole with the silicone coupler. The upper hole is for mounting the factory Mass Air Flow Sensor.

 

R61 PACEMAN PARTS

AIRVIP 3 : R61 Mini Cooper Paceman Coupe S and ALL4 S Air Intake for 2013 + Models

AIRVIP 3: is the latest version for the Paceman S/ALL4 S. The kit comes with a K&N high flow air filter. Brackets, silicone tubes, clamps and all hardware needed to let your Paceman Coupe S/ALL4S breathe right. Laser cut and powder coated mounting bracket with removable top cover to access the filter for cleaning. Estimated 10HP gain @ 4650 rpms. Watch our video on AIRVIP 3 and note how solid the mounting is with the added top cover and mounting bracket. The top cover keeps the cool air (which comes from the O.E.M. fresh air tube) trapped. Thus reducing intake temperatures. All our parts are made from the highest quality materials. The top cover is powder coated in texture black.

VPN 803 (2013+): $269.00

FREE SHIPPING

Cars
 

R61 Mini Cooper Paceman Coupe S and ALL4 S 2013 + COMBO KITS

(COMBO 1) VPN 803 /1110/1302 $531.00

(COMBO 2) VPN 803/1110/1302/407 DP $1,688.00 S and ALL4 S

COMBO 1 (8% off)

COMBO 2 (10% off)

FREE SHIPPING

COMBO
MODELS

Complete VPN 803 kit shown

 

 

AIRVIP 2: R61 Mini Cooper Paceman Coupe non S 2013 +

AIRVIP 2: This is an air intake for the standard Paceman Coupe that comes with a K&N drop-in high flow air filter, a Mandrel Bent aluminum cold air tube with Tig Welded key way and mounting bracket, and Silicone connector with clamps. The cold air tube is powder coated for durability, The New cold air tube improves Throttle response all the way through the power band. You will hear and feel the difference, not to mention it looks trick. This version is the quiet intake system.

VPN 802 TUBE ONLY: $169.00 *

*(Also Fits EURO Cars)

FREE SHIPPING

VERSIONS

 

AIRVIP 2.5: R61 Mini Cooper Paceman Coupe non S 2013 +

AIRVIP 2.5:This is an air intake for the standard Paceman Coupe that comes with a K&N high flow air filter. We laser cut and tig weld the new mounting cover, to which the air flow sensor bolts to. This unit replaces the stock air box lid. We use all the factory mounting locations, including the valve cover bolt. Watch our video and notice how solid AIRVIP 2.5 is with the valve cover bracket in place. Expect about 4 to 5 hp @ 5000 RPM's. You will definitely hear this intake system.

VPN 802.5 air intake system: $249.00

VPN 802 + 802.5 combo kit: $349.00

FREE SHIPPING

Cars

 

 

O.E.M. style front hanger bracket

Machined V-band clamps with precise tig welding

Stock 2 1/8 inch 409 SS pipe on left / VIP 2.5 inch 304 SS pipe on right.

R61 Mini Cooper Paceman Coupe S Exhaust 2013 + Models

(DP series) This is our Mandrel bent performance exhaust for the Paceman Coupe S. Made from 2.5 inch 304 stainless steel exhaust tube. We exit the vehicle with two 4 inch round tips in polished 304 ss. The exhaust note is a deep tone. This is one of the finest exhaust systems that you can purchase. Don't settle for half an exhaust system for your Paceman Coupe S. Go with our full DP back system. 100% stainless steel. Simple installation. Our system is around 12 foot long and is shipped to you in three sections. The stock S exhaust is very restrictive. This will make your Paceman Coupe come alive. Our system is from the turbo's down pipe back, removing the second cat. The system does not remove or effect the oxygen sensors in anyway, just offers you the most performance out of your Paceman Coupe S.

NO CUTTING REQUIRED

VPN 407 DP Paceman Coupe S (not all 4) exhaust system: $1299.00

FREE SHIPPING

CARS

(DP series) For off road use only or competition. Not emissions, DOT, CARB, or EPA certified. Not intended or applicable for use on public streets or highways.

Rear S muffler shown installed

Dual wall flex with interlock liner that bolts to the O.E.M. down pipe.

 

 

 

 

VIP 4 inch tips

VIP front resonator shown

 

Stock 2 1/8 inch 409 SS pipe on left / VIP 2.5 inch 304 SS pipe on right.

 

R61 Mini Cooper Paceman Coupe ALL/4 S Exhaust 2013 + Models

(DP series) This is our Mandrel bent performance exhaust for the Paceman Coupe S ALL4 Made from 2.5 inch 304 stainless steel exhaust tube. We exit the vehicle with two 4 inch round tips in polished 304 ss. The exhaust note is a deep tone. This is one of the finest exhaust systems that you can purchase. Don't settle for half an exhaust system for your Paceman ALL4 S. Go with our full flex joint back system. 100% stainless steel. Simple installation. Our system is around 11 foot long and is shipped to you in three sections. The stock S exhaust is very restrictive. This will make your Paceman Coupe come alive. Our system is from the turbo's down pipe back, removing the second cat. The system does not remove or effect the oxygen sensors in anyway, just offers you the most performance out of your Paceman Coupe S ALL4. Requires cutting the O.E.M. exhaust system after the front flex joint (slip-on)

VPN 407 DP/ALL4 Paceman Coupe ALL4 S exhaust system: $1299.00

FREE SHIPPING

CARS

(DP series) For off road use only or competition. Not emissions, DOT, CARB, or EPA certified. Not intended or applicable for use on public streets or highways.

Rear ALL4S muffler shown installed

Machined V-band clamps with precise tig welding

O.E.M. style front hanger bracket

 

 

Rear ALL4 muffler shown

R61 Mini Cooper Paceman Coupe S and ALL 4 S Exhaust 2013 + Models

(AB series) This is our Mandrel bent exhaust for the Paceman Coupe S/ALL4 S Made from 2.5 inch 304 stainless steel exhaust tube. We exit the vehicle with two 4 inch round tips in polished 304 ss. The exhaust note is a deep tone. This is one of the finest exhaust systems that you can purchase. 100% 304 stainless steel. Simple installation. Requires cutting the O.E.M. exhaust system just before the rear axle (slip-on)

VPN 407 AB CPaceman Coupe S/ALL 4 S axle back exhaust system: $999.00

FREE SHIPPING

CARS

 

 

 

R61 Strut Bar for 2013 + Paceman Coupe S and ALL4 S

We have come out with this strut bar and tower plate combo for the R61 Paceman Coupe S. The bar clears your stock S intake. The end plates are laser cut from steel then tig welded to perfection. The end plates are powder coated in Texture black and the round bar comes in Texture black.

VPN 1110 Strut Bar/ Mounting Plates: $199.00

FREE SHIPPING

Cars
 

R61 Strut Bar for 2013 + Paceman NON S

We made some changes to our very popular VPN 1110 to fit the NON S Cars. The bar clears your stock intake and resonator box. The end plates are laser cut from steel then tig welded to perfection. We powder coat the round bar and plates in Texture black for the most durable finish on the market.

VPN 1112 Strut Bar/ Mounting Plates: NON S $199.00

FREE SHIPPING

Cars
 

 

R61 Mini Paceman Coupe S and ALL4 S TURBO HEAT SHIELD 2013 + Models.

We made some changes to our very popular heat shield to fit the Paceman Coupe S. This will cover the O.E.M. turbo heat shield to dress up the hammer job of the factory part and also keep the heat under control from the turbo. Laser cut from 300 series stainless steel and then run through the grainer to add a nice finished look. Comes with CNC machined mounting hardware and all stainless steel bolts. Instructions included. You will have to remove the plastic wire dressing cover on some cars to install.(shown in picture)

VPN 1302: $109.00

FREE SHIPPING

Cars
 

 

 

R61 Mini Cooper Paceman Coupe S and ALL4 S 2013 + COMBO KITS

(COMBO 1) VPN 803 /1110/1302 $531.00

(COMBO 2) VPN 803/1110/1302/407 DP $1,688.00 S and ALL4 S

COMBO 1 (8% off)

COMBO 2 (10% off)

FREE SHIPPING

COMBO
MODELS

 

R61 Mini Paceman Coupe Dual Rally /Driving Light Brackets for 2013 + Models

We have come out with our driving light brackets (for 2 lights) for the Mini Paceman Coupe. Laser cut from 300 series stainless steel. Precise tig welding and powder coated texture black. There is NO DRILLING involved. They mount to the bumper support using the factory bolts. Grill must be trimmed (passenger side only) Comes with all hardware, complete instructions and grill template.

VPN 515: $169.00

FREE SHIPPING

MODELS

Some lights that fit our brackets

Hella 500, Micro 70 led

PIAA 510, 520, 525, 540

Wipac 6066 and many more

End brackets shown

Center bracket shown

 

R61 Mini Paceman Coupe Quad Rally/ Driving Light Brackets for 2013 + Models

We have come out with this quad light bar for the Paceman Coupe. Laser cut from 300 series stainless steel. Precise tig welding and powder coated texture black. This is a five piece Quad light bar kit. Includes left and right brackets, two center brackets and one radius bar to match the curve of the grill perfectly. The brackets mount to the bumper support using the factory bolts. There is NO DRILLING or removal of any bumper parts required to install. Grill must be trimmed (passenger side only) Comes with complete hardware, instructions and grill template.

VPN 515-4: $289.00

FREE SHIPPING

Cars

CALL FOR NON S CARS

Some lights that fit our brackets

Hella 500, Micro 70 led

PIAA 510, 520, 525, 540

Wipac 6066 and many more

5.5 inch black clear lights

Mini O.E.M. covers come with 5.5 inch lights

VCP guide to choosing your lights

R61 Mini Paceman Coupe Dual Rally Driving Light Kit for 2013 + Models

Improve the look of your Mini Paceman Coupe S/ALL4S with VIP's driving light kit. This is a complete driving light kit for the R61 Paceman The kit includes two 55 watt lights, 2 heavy duty brackets, relay, all wiring, one interior switch, hardware, and installation instructions. Everything you need to light up the road. Grill must be trimmed on one side.

VPN 618 $399.00

FREE SHIPPING

VERSIONS
 

CALL FOR NON S CARS

 

 

 

5.5 inch black clear lights

 

VCP guide to choosing your lights

6.3 inch Hella 500 black magic kit

6.3 inch Hella 500 black magic kit

R61 Mini Paceman Coupe Quad Rally Driving Light Kit for 2013 + Models

Improve the look of your Mini Paceman Coupe S/ALL4S with VIP's driving light kit. The kit includes four 55 watt lights, left and right brackets, 2 center brackets and one radius bar to match the bumper contour perfectly. Relay, all wiring, one interior switch, hardware, and installation instructions included. Everything you need to light up the road. Grill must be trimmed on one side.

VPN 618-4 $599.00

FREE SHIPPING

VERSIONS
 

CALL FOR NON S CARS

Mini O.E.M. covers come with 5.5 inch lights

5.5 inch black clear lights

 

R61 Mini Paceman Coupe Rear Wiper Delete for 2013 + models

This part eliminates the rear wiper, leaving the car with a cleaner look. The metal center cap is powder coated flat black. Retains stock rear wiper seal. NO LEAKS HERE. Don't settle for copy's. Comes with complete instructions.

VPN 630: $24.00

FREE SHIPPING

Cars
 

   

 

Solid 4140 Chromoly

Forged ends

Greaseable D bushings.

R61 Mini Cooper Paceman rear sway bar for 2013 + models

VCP 23MM Paceman rear sway bar will increase handling and cornering grip over the O.E.M. 16MM rear sway bar. Our 3-position rear sway bar is adjustable for those track days. We manufacture all our sway bars from high strength solid 4140 Chromoly. We only use the best material. One prime coat and then one finish coat in Bright Red for a long lasting finish. This kit comes complete with new greaseable sway bar D bushings and full instructions.

VPN 1740 R: $349.00

FREE SHIPPING

SOLD OUT

VCP 3-position adjustable rear sway bar

Aluminum spacers and grease included

2013+ R61 Mini Paceman S/All4 S catless downpipe.

VIP's catless downpipe made from mandrel bent 2.5 inch 304 stainless steel. Laser cut 304 ss 3/8 inch thick turbo flange. Laser cut mounting bracket with VIP logo. Plus, precise tig welding and Factory fitment. Expect only the best from VCP exhaust parts. You will need to have an ECU tune after installation.

VPN 402 DP $349.00

FREE SHIPPING

CARS
 

INCLUDED IN KIT

304 SS Down Pipe

RTV Silicone Gasket

3/8 Offset Oxygen Sensor Wrench

3/8 Bolt For V-Band Removal

Anti-Seize Copper Grease

1.25 INCH 7075-T6 ALUMINUM BARS

303 STAINLESS STEEL MISALIGNMENT SPACERS

R61 Mini Cooper Paceman rear lower control arm for 2013 + models

VCP 7075-T6 aluminum rear lower control arms. We cnc machine the center bars from 1.25 inch 7075-T6 aluminum. We use heavy duty rod ends with self-lubricating carbon fiber-reinforced inserts. The threaded rod ends allow you to dial the suspension camber to your desired spec. We cnc machine the misalignment spacers from stainless steel. VCP only uses the best material available to manufacture all our parts. The kit comes with left and right lower control arms with all hardware and installation instructions. The VCP rear control arms are pre-set to the approximate stock lengths. Finished in Texture black powder coat.

VPN 2002: $249.00

FREE SHIPPING

CARS

ADJUSTABILITY

The best method for measuring camber is by using a proper camber gauge. Remember to use the stock camber as a baseline even though stock camber on a lowered Mini will already have some negative camber. It is simply a starting point.